181401-2 Door Pull shown with optional LED’s

This door handle is made up with multicolor glass stringers that have been twisted into a spiral to give it a "barber pole effect". Any combination of colors can be ordered to match your specific surrounding decor. This design can be hand pulled to a length of 10" and the glass pull itself is approximately 2" in diameter and stands 4" off the door. Shown with “Deco” ends, it can also be done with “Block” or “Sculptural” ends. The "Deco" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired. The pictures above are of the 181401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. The 4th picture of the handle is with white LED light so you can see the true colors of the glass.

181401-3 Door Pull shown with optional LED’s

This door handle is made up with multicolor glass stringers that have been twisted into a spiral to give it a "barber pole effect". Any combination of colors can be ordered to match your specific surrounding decor. This design can be hand pulled to a length of 10" and the glass pull itself is approximately 2" in diameter and stands 4" off the door. Shown with “Deco” ends, it can also be done with “Block” or “Sculptural” ends. The "Deco" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired. The pictures above are of the 181401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. The 4th picture of the handle is with white LED light so you can see the true colors of the glass.

181401-4 Door Pull shown with optional LED’s

This door handle is made up with multicolor glass stringers that have been twisted into a spiral to give it a "barber pole effect". Any combination of colors can be ordered to match your specific surrounding decor. This design can be hand pulled to a length of 10" and the glass pull itself is approximately 2" in diameter and stands 4" off the door. Shown with “Deco” ends, it can also be done with “Block” or “Sculptural” ends. The "Deco" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired. The pictures above are of the 181401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. The 4th picture of the handle is with white LED light so you can see the true colors of the glass.

181401-5 Door Pull shown with optional LED’s

This door handle is made up with multicolor glass stringers that have been twisted into a spiral to give it a "barber pole effect". Any combination of colors can be ordered to match your specific surrounding decor. This design can be hand pulled to a length of 10" and the glass pull itself is approximately 2" in diameter and stands 4" off the door. Shown with “Deco” ends, it can also be done with “Block” or “Sculptural” ends. The "Deco" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired. The pictures above are of the 181401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. The 4th picture of the handle is with white LED light so you can see the true colors of the glass.

181401-6 Door Pull shown with optional LED’s

This door handle is made up with multicolor glass stringers that have been twisted into a spiral to give it a "barber pole effect". Any combination of colors can be ordered to match your specific surrounding decor. This design can be hand pulled to a length of 10" and the glass pull itself is approximately 2" in diameter and stands 4" off the door. Shown with “Deco” ends, it can also be done with “Block” or “Sculptural” ends. The "Deco" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired. The pictures above are of the 181401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. The 4th picture of the handle is with white LED light so you can see the true colors of the glass.

181401-7 Door Pull shown with optional LED’s

This door handle is made up with multicolor glass stringers that have been twisted into a spiral to give it a "barber pole effect". Any combination of colors can be ordered to match your specific surrounding decor. This design can be hand pulled to a length of 10" and the glass pull itself is approximately 2" in diameter and stands 4" off the door. Shown with “Deco” ends, it can also be done with “Block” or “Sculptural” ends. The "Deco" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired. The pictures above are of the 181401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. The 4th picture of the handle is with white LED light so you can see the true colors of the glass.

311402 Door Pull (Can be LED lit)

This door handle is hand pulled cane to a length of 10" and approximately 2" in diameter. The handle stands 4" off the door. The overall length of the handle with the matching top and bottom finial orbs is 15". The orbs can be left off if not wanted or incorporate a different design to set them off from the center glass. Shown with “Block” ends, it can also be done with “Deco” or “Sculptural” ends. The "Block" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired.

311403 Door Pull

This door handle is hand pulled cane to a length of 10" and approximately 2" in diameter. The handle stands 4" off the door. The overall length of the handle is 11 1/2"".  The "Deco" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired.  Due to the dark colors of this design, it does not lend itself to being LED lit.

311404 "Crab" Door Pull shown with optional LED’s

This door handle is hand pulled cane to a length of 10"- 13” and approximately 2" in diameter. The handle stands 4 1/2" off the door. The overall length of the handle can be made from 12” to 15” long. Shown with our “Crab” Sculptural Series ends made from 316 stainless and bronze materials for harsh outside environmental conditions. Available in seven architectural finishes to match your décor. The State of the Art technology used to create these Sculptural Series ends is done with 3D metal Printing.  Anything that can be dreamed up can be created using this cutting edge technology!  We have already created other designs in the Sculptural Series that can seen by clicking on the above 'NEWEST' tab.

351401-2 Door Pull shown with optional LED’s

This door handle is a totally custom etched design to your desire. Great for hospitality entrances or residential grandeur. This clear etched glass design can be made as long as 24" in length. The glass pull itself is approximately 2" in diameter and stands 4" off the door. The pictures above are of the 351401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. Shown with “Deco” ends, it can also be done with “Block” or “Sculptural” ends. The "Deco" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired.  The 4th picture of the handle is with white LED light so you can see the etching with no color.

351401-3 Door Pull shown with optional LED’s

This door handle is a totally custom etched design to your desire. Great for hospitality entrances or residential grandeur. This clear etched glass design can be made as long as 24" in length. The glass pull itself is approximately 2" in diameter and stands 4" off the door. The pictures above are of the 351401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. Shown with “Deco” ends, it can also be done with “Block” or “Sculptural” ends. The "Deco" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired.  The 4th picture of the handle is with white LED light so you can see the etching with no color.

351401-4 Door Pull shown with optional LED’s

This door handle is a totally custom etched design to your desire. Great for hospitality entrances or residential grandeur. This clear etched glass design can be made as long as 24" in length. The glass pull itself is approximately 2" in diameter and stands 4" off the door. The pictures above are of the 351401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. Shown with “Deco” ends, it can also be done with “Block” or “Sculptural” ends. The "Deco" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired.  The 4th picture of the handle is with white LED light so you can see the etching with no color.

351401-5 Door Pull shown with optional LED’s

This door handle is a totally custom etched design to your desire. Great for hospitality entrances or residential grandeur. This clear etched glass design can be made as long as 24" in length. The glass pull itself is approximately 2" in diameter and stands 4" off the door. The pictures above are of the 351401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. Shown with “Deco” ends, it can also be done with “Block” or “Sculptural” ends. The "Deco" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired.  The 4th picture of the handle is with white LED light so you can see the etching with no color.

351401-6 Door Pull shown with optional LED’s

This door handle is a totally custom etched design to your desire. Great for hospitality entrances or residential grandeur. This clear etched glass design can be made as long as 24" in length. The glass pull itself is approximately 2" in diameter and stands 4" off the door. The pictures above are of the 351401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. Shown with “Deco” ends, it can also be done with “Block” or “Sculptural” ends. The "Deco" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired.  The 4th picture of the handle is with white LED light so you can see the etching with no color.

351401-7 Door Pull shown with optional LED’s

This door handle is a totally custom etched design to your desire. Great for hospitality entrances or residential grandeur. This clear etched glass design can be made as long as 24" in length. The glass pull itself is approximately 2" in diameter and stands 4" off the door. The pictures above are of the 351401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. Shown with “Deco” ends, it can also be done with “Block” or “Sculptural” ends. The "Deco" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired.  The 4th picture of the handle is with white LED light so you can see the etching with no color.

361401-1 Door Pull shown with optional LED’s

This door handle is a totally custom etched design featuring a mermaid with flowing hair and legs. Any design can be etched to your desired taste. The glass balls on each end can also be a custom design or can be left off if you so choose. This clear etched glass design can be made as long as 24" in length.  The glass pull itself is approximately 2" in diameter and stands 4" off the door. Shown with “Block” ends, it can also be done with “Deco” or “Sculptural” ends. The "Block" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired. The pictures above are of the 361401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. The 4th picture of the handle is with white LED light so you can see the etching with no color.

361401-2 Door Pull shown with optional LED’s

This door handle is a totally custom etched design featuring a mermaid with flowing hair and legs. Any design can be etched to your desired taste. The glass balls on each end can also be a custom design or can be left off if you so choose. This clear etched glass design can be made as long as 24" in length.  The glass pull itself is approximately 2" in diameter and stands 4" off the door. Shown with “Block” ends, it can also be done with “Deco” or “Sculptural” ends. The "Block" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired. The pictures above are of the 361401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. The 4th picture of the handle is with white LED light so you can see the etching with no color.

361401-3 Door Pull shown with optional LED’s

This door handle is a totally custom etched design featuring a mermaid with flowing hair and legs. Any design can be etched to your desired taste. The glass balls on each end can also be a custom design or can be left off if you so choose. This clear etched glass design can be made as long as 24" in length.  The glass pull itself is approximately 2" in diameter and stands 4" off the door. Shown with “Block” ends, it can also be done with “Deco” or “Sculptural” ends. The "Block" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired. The pictures above are of the 361401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. The 4th picture of the handle is with white LED light so you can see the etching with no color.

361401-4 Door Pull shown with optional LED’s

This door handle is a totally custom etched design featuring a mermaid with flowing hair and legs. Any design can be etched to your desired taste. The glass balls on each end can also be a custom design or can be left off if you so choose. This clear etched glass design can be made as long as 24" in length.  The glass pull itself is approximately 2" in diameter and stands 4" off the door. Shown with “Block” ends, it can also be done with “Deco” or “Sculptural” ends. The "Block" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired. The pictures above are of the 361401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. The 4th picture of the handle is with white LED light so you can see the etching with no color.

361401-5 Door Pull shown with optional LED’s

This door handle is a totally custom etched design featuring a mermaid with flowing hair and legs. Any design can be etched to your desired taste. The glass balls on each end can also be a custom design or can be left off if you so choose. This clear etched glass design can be made as long as 24" in length.  The glass pull itself is approximately 2" in diameter and stands 4" off the door. Shown with “Block” ends, it can also be done with “Deco” or “Sculptural” ends. The "Block" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired. The pictures above are of the 361401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. The 4th picture of the handle is with white LED light so you can see the etching with no color.

361401-6 Door Pull shown with optional LED’s

This door handle is a totally custom etched design featuring a mermaid with flowing hair and legs. Any design can be etched to your desired taste. The glass balls on each end can also be a custom design or can be left off if you so choose. This clear etched glass design can be made as long as 24" in length.  The glass pull itself is approximately 2" in diameter and stands 4" off the door. Shown with “Block” ends, it can also be done with “Deco” or “Sculptural” ends. The "Block" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired. The pictures above are of the 361401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. The 4th picture of the handle is with white LED light so you can see the etching with no color.

361401-7 Door Pull shown with optional LED’s

This door handle is a totally custom etched design featuring a mermaid with flowing hair and legs. Any design can be etched to your desired taste. The glass balls on each end can also be a custom design or can be left off if you so choose. This clear etched glass design can be made as long as 24" in length.  The glass pull itself is approximately 2" in diameter and stands 4" off the door. Shown with “Block” ends, it can also be done with “Deco” or “Sculptural” ends. The "Block" metal ends shown are either machined from solid brass or 316 stainless steel depending on the environmental conditions and the finish desired. The pictures above are of the 361401 Door Pull lit with different colors being projected thru it from built-in LED's in the metal ends of the door handle. The 4th picture of the handle is with white LED light so you can see the etching with no color.

Sculptural Series "Nautilus" Door Handle

This handle is shown with our “Nautilus” Sculptural Series ends made from 316 stainless and bronze materials for harsh outside environmental conditions. Available in seven architectural finishes to match your décor. The State of the Art technology used to create these Sculptural Series ends is done with 3D metal Printing.  Anything that can be dreamed up can be created using this cutting edge technology!

Sculptural Series "Turtle" Door Handle

This handle is shown with our “Turtle" Sculptural Series ends made from 316 stainless and bronze materials for harsh outside environmental conditions. Available in seven architectural finishes to match your décor. The State of the Art technology used to create these Sculptural Series ends is done with 3D metal Printing.  Anything that can be dreamed up can be created using this cutting edge technology!

Sculptural Series "Turtle" Door Handle (top end view)

This handle is shown with our “Turtle" Sculptural Series ends made from 316 stainless and bronze materials for harsh outside environmental conditions. Available in seven architectural finishes to match your décor. The State of the Art technology used to create these Sculptural Series ends is done with 3D metal Printing.  Anything that can be dreamed up can be created using this cutting edge technology!

Sculptural Series "Turtle" Door Handle (bottom end view)

This handle is shown with our “Turtle" Sculptural Series ends made from 316 stainless and bronze materials for harsh outside environmental conditions. Available in seven architectural finishes to match your décor. The State of the Art technology used to create these Sculptural Series ends is done with 3D metal Printing.  Anything that can be dreamed up can be created using this cutting edge technology!